Pteradactyl Dinozord
Colors matched: 0 / 4 — pick a spool for every color to mark ready.
📝 Notes
Print profile: 0.2mm layer, 2 walls, 15% infill
4 colors needed (match a spool each).
Boost MeHelp my robots conquer the world (or at least your desk).You helped me bring the 5 Zords to life. Now boost the next prototype UPDATE V.2 12/6/2026Conection between Pterodactyl and the Mamut MAmut update 3/28/26Along with this, I made a small update to the mammoth's front legs; I just added a couple of pins to hold the tyrannosaurus's tail. The Pterodactyl Dinozord, piloted by the original Pink Ranger Kimberly, is the only one capable of flight. It emerges from an active volcano.
🔗 URL
Boost MeHelp my robots conquer the world (or at least your desk).You helped me bring the 5 Zords to life. Now boost the next prototype UPDATE V.2 12/6/2026Conection between Pterodactyl and the Mamut MAmut update 3/28/26Along with this, I made a small update to the mammoth's front legs; I just added a couple of pins to hold the tyrannosaurus's tail. The Pterodactyl Dinozord, piloted by the original Pink Ranger Kimberly, is the only one capable of flight. It emerges from an active volcano.
🧩 Plates & colors
MakerWorld usually lists plates (not STL part names). Color dots show which colors that plate uses. Rename a plate and tick which colors it uses if you want.
🧵 Spools needed
Match one of your spools to each color. When all colors are matched → ready to print. (AMS not required.) Yellow material? means that spool’s material does not match what the model asks for (e.g. ABS+ vs PLA) — you can still pick it if you want.